• Lightweight, durable ABS shell
• 6 air vents for increased air circulation & comfort
• 6 point pushlock harness
• Sweatband prevents perspiration build-up
• Extended peak for added protection
• Edge gutter to deflect rain

• Lightweight, durable ABS shell
• 6 air vents for increased air circulation & comfort
• 6 point ratchet harness
• Sweatband prevents perspiration build-up
• Full brim extends coverage to over the neck & ears
• Wide range of colours
• Slightly shorter front peak allowing for good upward vision

• Lightweight, durable ABS shell
• 9 air vents for increased air circulation & comfort
• 6 point pushlock harness
• Sweatband prevents perspiration build-up
• Extended peak for added protection
• Edge gutter to deflect rain

• Lightweight, durable ABS shell
• 9 air vents for increased air circulation & comfort
• 6 point ratchet harness
• Sweatband prevents perspiration build-up
• Extended peak for added protection
• Edge gutter to deflect rain
• Wide range of colours

• Quick hook and loop hard hat attachment and removal
• May be worn with hard hat or as a balaclava
• Optional mouth cover
• 3M Thinsulate insulation with soft fleece lining

• Certified to AS/NZS 1716:2012 Respiratory Protective Devices
• Durable thermoplastic rubber mask for superior fit
• Retro reflective tape for improved wearer visibility
• Enhanced bolstered four point cradle suspension harness for improved load bearing, better fit and comfort
• Low resistance exhalation valve to reduce heat and moisture build up
• Able to be worn under most welding helmets
• Twin filter design provides a more balanced fit, lower breathing resistance and improves field of vision
• Kit includes: 1 x mask, 2 x A1 filters, 2 x P2 pads and retainers, and 1 x resealable bag for hygienic storage
• Sold Individually

• Certified to AS/NZS 1716:2012 Respiratory Protective Devices.
• Durable thermoplastic rubber mask for superior fit.
• Retro reflective tape for improved wearer visibility.
• Enhanced bolstered four point cradle suspension harness for improved load bearing, better fit & comfort.
• Able to be worn under most welding helmets.
• Twin filter design provides a more balanced fit, lower breathing resistance & improves field of vision.
• Low resistance exhalation valve to reduce heat and moisture build up.
• Kit includes: 1 x Mask, 2 x A1P2 Filters, 5 x pairs of P2 Pre Filters, 1 x Resealable Plastic Box for hygienic storage, & 1 x Reusable Plastic Bag.

• Certified to AS/NZS 1716:2012 Respiratory Protective Devices
• Durable thermoplastic rubber mask for superior fit
• Retro reflective tape for improved wearer visibility
• Enhanced bolstered four point cradle suspension harness for improved load bearing, better fit and comfort
• Low resistance exhalation valve to reduce heat and moisture build up
• Able to be worn under most welding helmets
• Twin filter design provides a more balanced fit, lower breathing resistance and improves field of vision
• Kit includes: 1 x mask, 2 x ABEK1 filters & 1 x resealable bag for hygieninc storage
• Sold Individually

• Certified to AS/NZS 1716:2012 Respiratory Protective Devices.
• Durable thermoplastic rubber mask for superior fit.
• Retro reflective tape for improved wearer visibility.
• Enhanced bolstered four point cradle suspension harness for improved load bearing, better fit & comfort.
• Able to be worn under most welding helmets.
• Twin filter design provides a more balanced fit, lower breathing resistance & improves field of vision.
• Low resistance exhalation valve to reduce heat and moisture build up.
• Kit includes: 1 x Mask, 2 x ABEK1P2 Filters, 5 x pairs of P2 Pre Filters, 1 x Resealable Plastic Box for hygienic storage, & 1 x Reusable Plastic Bag.

• Certified to AS/NZS 1716:2012 Respiratory Protective Devices.
• Durable thermoplastic rubber mask for superior fit.
• Retro reflective tape for improved wearer visibility.
• Enhanced bolstered four point cradle suspension harness for improved load bearing, better fit & comfort.
• Twin filter design provides a more balanced fit, lower breathing resistance & improves field of vision.
• Kit includes: 1 x Mask, 2 x P2 Filters, 5 x pairs of P2 Pre Filters, 1 x Resealable Plastic Box for hygienic storage, & 1 x Reusable Plastic Bag.
• Low resistance exhalation valve to reduce heat and moisture build up.

• Fully adjustable four point cradle suspension ensuring an effective facial fit
• Low profile angle filter design for minimum visual impairment
• Durable thermoplastic rubber mask for superior fit
• Contour moulded nose for fit with glasses and goggles
• Able to be worn under most welding helmets
• Quick and easy filter cartridge connection
• Low resistance exhalation valve - to reduce heat and moisture build up
• Sold Individually

Class 4 protection with SLC80 rating of 25dB

Unique Elastex™ sweat reducing ear cushions

Super low headband tension for extended use

Stainless steel spring wire system provides constant clamp pressure

Ideal for wearing with a helmet or hat

• High quality blue cow split leather
• Kevlar stitched to withstand high temperatures for longer periods
• Lined and welted
• Reinforced palm and thumb for added durability
• 406mm (16 inches) long for forearm protection
• One Size Fits All

• Turtle Back hard shell for easy swivelling and durability
• Gel padding back and sides enhances comfort and assists in even weight distribution
• Double neoprene straps provide secure, comfort fit
• Clip on buckle for easy on/off and easy adjustment

• Non slip, non marking soft synthetic leather shell
• Soft shell flexes with knee
• Suitable for use on all interior floors
• Gel padding back and sides enhances comfort and assists in even weight distribution
• Double neoprene straps provide secure, comfortable fit
• Clip on buckle for easy on/off and easy adjustment

• Non slip, non marking soft shell
• Soft shell flexes with knee, allowing greater mobility of joint
• Suitable for use on all interior floors
• Two adjustable hook and loop straps for easy donning and doffing

• Lens Cleaning Wipes
• Alcohol and Ammonia Free pre moistened lens towelette
• Soft and absorbent
• Made from tissue designed specifically for lens cleaning
• Individually packed
• Anti bacterial
• Anti static
• Protects lens coatings ensuring longer usage life

• Two left hand gloves per pair avoids costly waste of less commonly used right hand glove
• High quality cow split leather for economy and comfort
• Kevlar stitched to withstand high temperatures for longer periods
• Lined and welted
• Reinforced palm to first finger for added durability
• 406mm (16 inches) long for forearm protection
• One Size Fits All

PRODUCT FEATURES
 - Antibacterial

 - Sustainable & biodegradable

 - Thermo regulating

 - Soft & comfortable

 - 85% bamboo, 10% polyester, 5% elastane

 - Fits sizes 5-11

PRODUCT FEATURES
 - 2 x light grey, 2 x charcoal, 1 x black

 - Reinforced heel & toe box

 - 80% cotton, 15% nylon, 5% elastane

 - Fits sizes 5-11

• High quality latex rubber for excellent sensitivity & dexterity
• Lightly powdered for easy donning and doffing

• High quality latex rubber for excellent sensitivity & dexterity
• Powder free for use where powder contamination may be an issue

• Made from 100% low odour Nitrile
• Latex free - suited for use by those allergic to latex
• Ambidextrous with textured fingers for enhanced grip in wet & dry conditions
• Improved protection from oils, grease, fuels, cleaners, solvents, chemicals & transmission fluid
• Specifically designed for use in the industrial, automotive repair & paint trade

• Certified to EN420:2003 AS/NZS 2161.2:2005 General Requirements
• Tested to EN455-1:2011 Water Leak Test
• Tested to EN455-2:2010 Resistance Test
• Tested to EN455-3:2007 Powder Free Test
• 6 mil heavy duty glove available in hi vis orange and black
• Latex free, vinyl free and powder free
• HACCAP approved
• Ambidextrous

• Lightweight, abrasion resistant nitrile
• Knitted wrist to exclude debris
• Open back improves ventilation

• Heavyweight, abrasion resistant nitrile
• Knitted wrist to exclude debris
• Fully dipped for full hand protection

• Lightweight, abrasion resistant nitrile
• Knitted wrist to exclude debris
• Fully dipped for full hand protection

• Heavyweight, abrasion resistant nitrile
• Canvas safety cuff for ease of donning / doffing
• Fully dipped for full hand protection

• Heavy duty neoprene with premium grade soft cotton flock lining for comfort
• Excellent for a wide range of chemical handling
• High resistance to most solvents, mild acids, oils & fats
• Electrostatic lining technology prevents lining being shed whilst improving comfort
• 30cm length

• Nitrile foam coated nylon gives excellent dexterity
• Nylon liner makes this glove lightweight and breathable
• Ideal for production line and small parts handling
• Anti static liner

• Seamless 15 gauge, 100% apparel grade nylon Shell
• PVC foam coating provides water repellency, comfort & enhanced gripping power in wet & dry conditions
• Silicone free

• Seamless 15 gauge, 100% apparel grade nylon Shell with fleece lining for cold environment work
• PVC foam coating provides water repellency, comfort & enhanced gripping power in wet & dry conditions
• Silicone free

• Seamless 15 gauge, nylon fused Lycra Shell
• Palm dipped nitrile / water based PU foam coating
• Dip provides additional back of hand protection
• Dip enhances gripping power in wet & dry conditions without sacrificing dexterity
• Can be used with touch screens

• Seamless 15 gauge, nylon fused Lycra shell
• 3/4 dipped nitrile / water based PU foam coating
• 3/4 dip provides additional back of hand protection
• Dip enhances gripping power in wet & dry conditions without sacrificing dexterity
• Can be used with touch screens

• Lightweight, low lint polyester machine knit liner
• Ultra thin nitrile sand grip palm
• Nitrile Coating provides superior gripping power in wet and dry conditions yet retains superior feel

• Arax Knit Technology with EN388 Cut 5 Protection
• Sand finish nitrile dip absorbs oil & grease for excellent grip in greasy conditions
• TPR padding protects fingers & knuckles from knocks & scrapes
• Anti-vibration foam padded palm - ideal for working with power tools
• Wrist tab for quick & easy donning & doffing
• Anti-Static

• Suitable for use with dust and mist.
• Lightweight moulded design for comfort and superior fit.
• Easily worn with glasses & goggles.
• P1 Certified to AS/NZS 1716:2012 Respiratory Protective Devices.
• Dual latex free elastic straps for ease of donning & doffing.
• Resealable bag for hygienic storage.
• Qty/Box - 20

• Suitable for use with dust, smoke, mist & fume.
• Lightweight moulded design with foam nose seal for comfort and superior fit.
• Easily worn with glasses & goggles.
• P2 Certified to AS/NZS 1716:2012 Respiratory Protective Devices.
• Dual latex free elastic straps for ease of donning & doffing.
• Resealable bag for hygienic storage.
• Qty/Box - 20

• Suitable for use with dust, smoke, mist & fume.
• Lightweight moulded design with foam nose seal for comfort and superior fit.
• ProValve for increased exhalation efficiency and comfort, reduces heat build-up under mask.
• Easily worn with glasses & goggles.
• P2 Certified to AS/NZS 1716:2012 Respiratory Protective Devices.
• Dual latex free elastic straps for ease of donning & doffing.
• Resealable bag for hygienic storage.
• Qty/Box - 12

• Suitable for use with dust, smoke, mist & fume.
• Lightweight moulded design with foam nose seal for comfort and superior fit.
• ProValve for increased exhalation efficiency and comfort, reduces heat build-up under mask.
• Easily worn with glasses & goggles.
• P2 Certified to AS/NZS 1716:2012 Respiratory Protective Devices.
• Dual latex free elastic straps for ease of donning & doffing.
• Resealable bag for hygienic storage.
• Qty/Box - 3

• Suitable for use with dust, smoke, mist & fume.
• Activated carbon layer reduces exposure to nuisance levels of organic vapor and odour.
• Lightweight moulded design with foam nose seal for comfort and superior fit.
• ProValve for increased exhalation efficiency and comfort, reduces heat build-up under mask.
• Easily worn with glasses & goggles.
• P2 Certified to AS/NZS 1716:2012 Respiratory Protective Devices.
• Dual latex free elastic straps for ease of donning & doffing.
• Resealable bag for hygienic storage.
• Qty/Box - 12

• Suitable for use with dust, smoke, mist & fume.
• Lightweight moulded design with mesh shell to resist collapsing in heat and humidity.
• Complete mask seal lining for increased comfort and fit.
• Easily worn with glasses & goggles.
• P2 Certified to AS/NZS 1716:2012 Respiratory Protective Devices.
• Dual QuickLock adjustable straps for ease of donning & doffing.
• Resealable bag for hygienic storage.
• Qty/Box - 12

• Suitable for use with dust, smoke, mist & fume.
• Lightweight moulded design with mesh shell to resist collapsing in heat and humidity.
• ProValve for increased exhalation efficiency and comfort, reduces heat build-up under mask.
• Complete mask seal lining for increased comfort and fit.
• Easily worn with glasses & goggles.
• P2 Certified to AS/NZS 1716:2012 Respiratory Protective Devices.
• Dual QuickLock adjustable straps for ease of donning & doffing.
• Resealable bag for hygienic storage.
• Qty/Box - 12