Thank you for supporting an Australian Owned business!
Operating since 1995, we are a family-run business and are delighted to announce that products manufactured on site are officially Australian Made and certified! Check out our range to see which products can boast this accomplishment!
.
.
.
Active filters
Take advantage of the ability to share ideas and messages by attaching relevant information and writing on the same surface.
This slimline finish looks both professional and elegant and shall endure for many years.
Take advantage of the ability to share ideas and messages by attaching relevant information and writing on the same surface.
This slimline finish looks both professional and elegant and shall endure for many years.
Take advantage of the ability to share ideas and messages by attaching relevant information and writing on the same surface.
This slimline finish looks both professional and elegant and shall endure for many years.
Take advantage of the ability to share ideas and messages by attaching relevant information and writing on the same surface.
This slimline finish looks both professional and elegant and shall endure for many years.
Take advantage of the ability to share ideas and messages by attaching relevant information and writing on the same surface.
This slimline finish looks both professional and elegant and shall endure for many years.
- Upper plastic jaw allows securing to belt loop / pocket
- Lower plastic jaw allows gripping of gloves
- Link arm designed to breakaway in the event of glove entanglement
- Never misplace your gloves again
Latex rubber glove with ripple palm for added grip
Jersey lined for comfort and sweat absorption
Knitted wrist to exclude debris
Green latex rubber glove
Heavy duty ripple gives excellent grip in wet environment
Interlock lined for added comfort
Black Knight Gripmaster Glove Maxisafe’s Black Gripmaster® coating technology ensures the Black Knight has excellent grip in wet, oily environments
Multi-layered Gripmaster technology prevents oil penetration while repelling water ensuring excellent grip
Anti-Bac antimicrobial treatment provides protection against harmful bacteria and an anti-odour barrier
13 gauge lycra/nylon shell provides stretch for a close fit and breathability
No strikethrough to the inside of the glove to cause irritation or heat build up
Machine washable increasing glove life without reducing effectiveness of Anti-Bac treatment
Thin coating ensures superior flexibility and dexterity
Certified to EN388:2016 rating 4 1 3 1 X
10 metre with hangers – 9kgs
Group 2 Height Bars - Hanger Beam
Supplied with text and 2 x hanger kit
Product Features:
- Maximum post height 8 metres.
- Max. height bar clearance 7.2 metres.
- Max. post span 12 metres.
- Max. height bar length 11.5 metres.
- Two-piece extruded aluminium height bar.
- Hanger kits included 2 x KIT22.
- Engineered to wind Region A, Terrain Category 2.
Group 2 Height Bars - Hanger Beam
Supplied with text and 2 x hanger kits
Product Features:
- Maximum post height 8 metres.
- Max. height bar clearance 7.2 metres.
- Max. post span 12 metres.
- Max. height bar length 11.5 metres.
- Two-piece extruded aluminium height bar.
- Hanger kits included 2 x KIT22.
- Engineered to wind Region A, Terrain Category 2.
Our Group 1 height bars are available in a range of standard lengths from 2 metres all the way up to 6 metres. Each height bar is supplied with the necessary chain suspension kits and “LOW CLEARANCE” text, with your specified height in Black lettering on a White vinyl background.
Use height bars at locations where vehicles first enter an undercover area or encounter an overhead obstruction, where the clearance in either case is: (i) 3 metres or less if only cars or light vans are likely to use the facility or (ii) 4.6 metres or less in all other areas.
Group 1 Height Bars - Cantilever Hanger
Supplied with text and hanger kit
3 metres with hangers – 9kgs
Product Features:
- Maximum height clearance 2.7 metres.
- Max. post span 6.5 metres.
- Max. height bar length 6 metres.
- Single piece extruded aluminium height bar.
- Hanger kit included 1x KIT22.
- Engineered to wind Region A, Terrain Category 2
Group 1 Height Bars - Cantilever Hanger
Supplied with text and hanger kit
4 metres with hangers – 11.5kgs
Product Features:
- Maximum height clearance 2.7 metres.
- Max. post span 6.5 metres.
- Max. height bar length 6 metres.
- Single piece extruded aluminium height bar.
- Hanger kit included 1x KIT22.
- Engineered to wind Region A, Terrain Category 2
Group 1 Height Bars - Cantilever Hanger
Supplied with text and hanger kit
5 metres with hangers – 14.2kgs
Product Features:
- Maximum height clearance 2.7 metres.
- Max. post span 6.5 metres.
- Max. height bar length 6 metres.
- Single piece extruded aluminium height bar.
- Hanger kit included 1x KIT22.
- Engineered to wind Region A, Terrain Category 2
8 metres with hangers – 6.4kgs.
Group 2 Height Bars - Hanger Beam
Supplied with text and 2 x hanger kits
Product Features:
- Maximum post height 8 metres.
- Max. height bar clearance 7.2 metres.
- Max. post span 12 metres.
- Max. height bar length 11.5 metres.
- Two-piece extruded aluminium height bar.
- Hanger kits included 2 x KIT22.
- Engineered to wind Region A, Terrain Category 2.
- Class 2, SLC80, 14dB
- Comfortable, convenient and lightweight headband
- Hearing protection for noise levels to 95dB(A)
- Foam ear pads are disposable and not designed for re-use
- Class 4, SLC80, 24dB
- Disposable, PU foam pads
- Hearing protection for noise levels up to 109dB
- Provides wearer the highest level of protection for a headband earplug
- Disposable PU foam pads are ergonomically designed to fit the ear for maximum protection
Surface Mount
Use 4x M16 chemical anchors with minimum embedment 150mm into reinforced concrete.
Ground Surface
Natural undisturbed soil, minimum 100kPa bearing capacity.
Clay & Sands
Cohesive solid (stiff clay - C=60kPa)
Embed RC250 reo cage into 30mpa concrete 450 diameter by 1100mm deep.
Non-Cohesive soils (Sands)
Embed RC250 reo cage into 30mpa concrete 600 diameter by 2000mm deep with 4 full depth R16 bars.
Group 1 Height Bar Adjustable Standoff Bracket each - 500mm
For Fixing HBS500 onto:
- HBPSM/HBPBG – Use M12 x 130mm Bolts (supplied)
- Brick or concrete wall – Use M12 Dyna Bolts or M12 Concrete Screws
Optional chain rings are available for connecting chains or ropes between bollards. Simply order with chain rings. Chain rings can also be purchased separately for retro fitting to existing bollards by drilling and tapping M10 threads as required.
APPLICATIONS
• Agriculture and Forestry
• Chemical
• Construction
• Fire Protection
• Manufacturing
• Medical
• Military
- Lightweight, durable ABS shell
- Unvented for situations where full head enclosure is required
- 6 point ratchet harness
- Sweatband prevents perspiration build-up
- Full brim extends coverage to over the neck & ears
- Slightly shorter front peak allowing for good upward vision
Lightweight, durable ABS shell
Unvented for situations where full head enclosure is required
6 point pushlock harness
Sweatband prevents perspiration build-up
Edge gutter to deflect rain
Wide range of colours
Lightweight, durable ABS shell
Unvented for situations where full head enclosure is required
6 point ratchet harness
Sweatband prevents perspiration build-up
Edge gutter to deflect rain
Wide range of colours
Lightweight guard will accommodate Pro Choice Safety Gear Visors - VC, VS, VS5 and VM
Fitted with QuickLock clips
- Lightweight guard will accommodate Pro Choice Safety Gear Visors - VC, VS, VS5 and VM
- Fitted with QuickLock clips
- Adjustable hard hat chin strap
- Keeps hard hat in place in active situations
- Comfy elastic material
- Class 5, SLC80, 26dB
- Fits a wide range of hard hats
- Hearing protection for noise levels to 110dB(A)
- Solid, lightweight ear cup construction
- High quality ear cushions
- Inner foam and soft cushions provide comfort during extended wear
- Low clamping force applies minimum pressure while maintaining a tight, snug seal
- Class 5, SLC80, 31dB
- Hi-Vis for visual identification
- Hearing protection for noise levels to 116dB(A)
- Robust steel wire construction for onsite demands
- Contemporary low profile design that withstands abuse without compromising comfort
- Solid, lightweight ear cup construction
- High quality ear cushions
- Fits a wide range of hard hats
- UPF45+ Sun protection rating
- Hi-Vis yellow for increased visibility
- Easy to attach and suits most hard hats or bump caps
- Lightweight, comfortable and cool to wear
- Retro reflective tape for increased visibility in low light conditions
- Hard hat neck sun shades are rated to UPF 45+ and provide Excellent protection against solar ultraviolet radiation (UVR).
- High performance retro reflective silver tape, 25mm
- Designed to work on all Pro Choice Safety Gear Hard Hats
- Hi-Visibility regardless of angle
- Tested to standards AS/NZS 1801:3.2.5
- Hard Hat not included
- Pro Choice Safety Gear cotton sweatband to suit all Pro Choice Safety Gear Hard Hats
- Replaceable for hygiene and comfort
- Lightweight, durable ABS shell
- 6 air vents for increased air circulation & comfort
- 6 point pushlock harness
- Sweatband prevents perspiration build-up
- Extended peak for added protection
- Edge gutter to deflect rain
- Lightweight, durable ABS shell
- 6 air vents for increased air circulation & comfort
- 6 point ratchet harness
- Sweatband prevents perspiration build-up
- Full brim extends coverage to over the neck & ears
- Wide range of colours
- Slightly shorter front peak allowing for good upward vision
- Lightweight, durable ABS shell
- 9 air vents for increased air circulation & comfort
- 6 point pushlock harness
- Sweatband prevents perspiration build-up
- Extended peak for added protection
- Edge gutter to deflect rain
- Lightweight, durable ABS shell
- 9 air vents for increased air circulation & comfort
- 6 point ratchet harness
- Sweatband prevents perspiration build-up
- Extended peak for added protection
- Edge gutter to deflect rain
- Wide range of colours
- Quick hook and loop hard hat attachment and removal
- May be worn with hard hat or as a balaclava
- Optional mouth cover
- 3M Thinsulate insulation with soft fleece lining
Kit includes:
- 1 x Mask
- 2 x A1P2 Filters
- 5 x pairs of P2 Pre Filters
- 1 x Resealable Plastic Box for hygienic storage
- 1 x Reusable Plastic Bag