.
Scroll mouse to zoom in or zoom out
Thank you for supporting an Australian Owned business!
Operating since 1995, we are a family-run business and are delighted to announce that products manufactured on site are officially Australian Made and certified! Check out our range to see which products can boast this accomplishment!
Announcement
We are pleased to announce that as from 1st January 2023 that Krystal Coulton will be appointed to the position of General Manager. Krystal has been with the organisation for over 20 years and during that time she has acted professionally and shown dedication to both to our clients and this organisation.
We have no doubt that Krystal in her new role will continue to serve all our clients with the dedication that she has shown in the past. We congratulate Krystal and wish her all the success as General Manager of Identisign.
.
.
DE-FENCE MESH PANEL 1150 X 1200 POST CENTRES - POWDER COATED BLACK
$185.90
CODE:
DFP115-120M
The standard De-fence panels are used with posts and brackets (including gate kits) to create an industrial safety fence to protect pedestrians or guard machinery and equipment. The panels are available in 7 standard widths and come with fully welded mesh in-fill. The mesh is a 3mm diameter steel wire at 25 x 25mm centres, giving an aperture size of 22mm square. It is welded into a tubular frame of 25 x 25 x 1.6mm mild steel RHS. The completed panels are finished in black powder coat.
Standard range of panels sizes available – 500, 750, 1000, 1200, 1500, 1700 and 2000mm wide by 1150mm deep. (Note: Panel widths relate to actual post centres). Available in either mesh or polycarbonate in-fills. When used with 2490mm posts, two panels are stacked on top of one another.
DFP115-120M
The standard De-fence panels are used with posts and brackets (including gate kits) to create an industrial safety fence to protect pedestrians or guard machinery and equipment. The panels are available in 7 standard widths and come with fully welded mesh in-fill. The mesh is a 3mm diameter steel wire at 25 x 25mm centres, giving an aperture size of 22mm square. It is welded into a tubular frame of 25 x 25 x 1.6mm mild steel RHS. The completed panels are finished in black powder coat.
Standard range of panels sizes available – 500, 750, 1000, 1200, 1500, 1700 and 2000mm wide by 1150mm deep. (Note: Panel widths relate to actual post centres). Available in either mesh or polycarbonate in-fills. When used with 2490mm posts, two panels are stacked on top of one another.
Products in the same category
DFP1280E
$156.20
DFP115-150M
$218.90
DFP115-170M
$229.90
DFP115-200M
$245.30
DFP2490
$243.10
DFP115-50M
$117.70