Thank you for supporting an Australian Owned business!

Operating since 1995, we are a family-run business and are delighted to announce that products manufactured on site are officially Australian Made and certified! Check out our range to see which products can boast this accomplishment!

Menu
0 Item

Shopping cart(0)

There are no more items in your cart

Active filters

10 metre with hangers – 9kgs

Group 2 Height Bars - Hanger Beam

Supplied with text and 2 x hanger kit

Product Features:

   - Maximum post height 8 metres.

   - Max. height bar clearance 7.2 metres.

   - Max. post span 12 metres.

   - Max. height bar length 11.5 metres.

   - Two-piece extruded aluminium height bar.

   - Hanger kits included 2 x KIT22.

   - Engineered to wind Region A, Terrain Category 2.

Group 2 Height Bars - Hanger Beam

Supplied with text and 2 x hanger kits


Product Features:

   - Maximum post height 8 metres.

   - Max. height bar clearance 7.2 metres.

   - Max. post span 12 metres.

   - Max. height bar length 11.5 metres.

   - Two-piece extruded aluminium height bar.

   - Hanger kits included 2 x KIT22.

   - Engineered to wind Region A, Terrain Category 2.

Our Group 1 height bars are available in a range of standard lengths from 2 metres all the way up to 6 metres. Each height bar is supplied with the necessary chain suspension kits and “LOW CLEARANCE” text, with your specified height in Black lettering on a White vinyl background.

Use height bars at locations where vehicles first enter an undercover area or encounter an overhead obstruction, where the clearance in either case is: (i) 3 metres or less if only cars or light vans are likely to use the facility or (ii) 4.6 metres or less in all other areas.

Group 1 Height Bars - Cantilever Hanger

Supplied with text and hanger kit

3 metres with hangers – 9kgs

Product Features:

   - Maximum height clearance 2.7 metres.

   - Max. post span 6.5 metres.

   - Max. height bar length 6 metres.

   - Single piece extruded aluminium height bar.

   - Hanger kit included 1x KIT22.

   - Engineered to wind Region A, Terrain Category 2

Group 1 Height Bars - Cantilever Hanger

Supplied with text and hanger kit

4 metres with hangers – 11.5kgs

Product Features:

   - Maximum height clearance 2.7 metres.

   - Max. post span 6.5 metres.

   - Max. height bar length 6 metres.

   - Single piece extruded aluminium height bar.

   - Hanger kit included 1x KIT22.

   - Engineered to wind Region A, Terrain Category 2

Group 1 Height Bars - Cantilever Hanger

Supplied with text and hanger kit

5 metres with hangers – 14.2kgs


Product Features:

   - Maximum height clearance 2.7 metres.

   - Max. post span 6.5 metres.

   - Max. height bar length 6 metres.

   - Single piece extruded aluminium height bar.

   - Hanger kit included 1x KIT22.

   - Engineered to wind Region A, Terrain Category 2

8 metres with hangers – 6.4kgs.

Group 2 Height Bars - Hanger Beam

Supplied with text and 2 x hanger kits


Product Features:

   - Maximum post height 8 metres.

   - Max. height bar clearance 7.2 metres.

   - Max. post span 12 metres.

   - Max. height bar length 11.5 metres.

   - Two-piece extruded aluminium height bar.

   - Hanger kits included 2 x KIT22.

   - Engineered to wind Region A, Terrain Category 2.

Built to Order

Surface Mount

Use 4x M16 chemical anchors with minimum embedment 150mm into reinforced concrete.

Ground Surface

Natural undisturbed soil, minimum 100kPa bearing capacity.

Clay & Sands

Cohesive solid (stiff clay - C=60kPa)

Embed RC250 reo cage into 30mpa concrete 450 diameter by 1100mm deep.

Non-Cohesive soils (Sands)

Embed RC250 reo cage into 30mpa concrete 600 diameter by 2000mm deep with 4 full depth R16 bars.

Group 1 Height Bar Adjustable Standoff Bracket each - 500mm

For Fixing HBS500 onto:

   - HBPSM/HBPBG – Use M12 x 130mm Bolts (supplied)

   - Brick or concrete wall – Use M12 Dyna Bolts or M12 Concrete Screws

Cohesive soils (stiff clay - C=60kPa)
Embed RC350 reo cage into 30mpa concrete 600 diameter by 1250mm deep.


Ground Surface
Natural undisturbed soil, minimum 100kPa bearing capacity.


Non-Cohesive soils (Sands)
Embed RC350 reo cage into 30mpa concrete 600 diameter by 2500mm deep with 4 additional full depth R20 bars.