Thank you for supporting an Australian Owned business!
Operating since 1995, we are a family-run business and are delighted to announce that products manufactured on site are officially Australian Made and certified! Check out our range to see which products can boast this accomplishment!
.
.
.
Active filters
L: 1000 x W: 380 x H: 50mm
The Blade Runner one way access spikes BRS1000 and BRS500 consist of either a 1000mm or 500mm heavy duty steel module. Steel end caps are available. Each module has independently retracting teeth.
When a vehicle approaches from the correct direction the teeth simply retract, allowing the vehicle to pass freely. When approached from an unauthorised direction, the teeth lock up denying access and risking almost certain tyre damage.
L: 500 x W: 380 x H: 50mm
The Blade Runner one way access spikes BRS1000 and BRS500 consist of either a 1000mm or 500mm heavy duty steel module. Steel end caps are available. Each module has independently retracting teeth.
When a vehicle approaches from the correct direction the teeth simply retract, allowing the vehicle to pass freely. When approached from an unauthorised direction, the teeth lock up denying access and risking almost certain tyre damage.
These end caps are compatible with;
- BRS500 - Blade Runner One Way Access Spikes 500mm - Powder Coated Green
- BRS1000 - Blade Runner One Way Access Spikes 1m - Powder Coated Green
L: 500 x W: 100 x H: 15mm
A durable and versatile low profile rubber rumble strip for use as a speed moderator or lane divider on roadways. Ideal in residential complexes to slow the flow of vehicles. Alternatively, it can be used as a wall mounted bump protector.
Manufactured from recycled rubber, 500mm long x 100mm wide x 15mm thick. Can be installed with appropriate masonry fixings or glued using a suitable adhesive.
L: 500 x W: 100 x H: 15mm
A durable and versatile low profile rubber rumble strip for use as a speed moderator or lane divider on roadways. Ideal in residential complexes to slow the flow of vehicles. Alternatively, it can be used as a wall mounted bump protector.
Manufactured from recycled rubber, 500mm long x 100mm wide x 15mm thick. Can be installed with appropriate masonry fixings or glued using a suitable adhesive.
L: 1000 x W: 350 x H: 52mm
Standard duty steel speed hump
Slo-motion is a modular steel speed control system consisting of truly independent super strong steel modules. The ends of each speed hump are finished off with a pair of end caps.
These end caps are moulded from an extremely durable rubber, or alternatively, steel end caps are also available if preferred. Suitable for car parks, shopping centres or factory complexes.
Available to 2 sizes; 500mm Module and 1mtr Module
L: 1000 x W: 350 x H: 55mm
The compatible end caps for these speed humps are SMSEC - Slo-Motion Steel Speed Hump End Caps per pair - Yellow
Available to 2 sizes; 500mm Module and 1mtr Module
L: 500 x W: 350 x H: 52mm
Standard duty steel speed hump
Slo-motion is a modular steel speed control system consisting of truly independent super strong steel modules. The ends of each speed hump are finished off with a pair of end caps.
These end caps are moulded from an extremely durable rubber, or alternatively, steel end caps are also available if preferred. Suitable for car parks, shopping centres or factory complexes.
Available in 2 sizes; 500mm Module and 1mtr Module
L: 500 x W: 350 x H: 55mm
The compatible end caps for these speed humps are SMSEC - Slo-Motion Steel Speed Hump End Caps per pair - Yellow
Available to 2 sizes; 500mm Module and 1mtr Module
L: 250 x W: 355 x H: 60mm
Slo-motion Compliance polyethylene speed hump
Introducing our ‘Slo-motion Compliance’ speed hump. Compliance is a modular speed control system consisting of independent modules each 250mm long with rounded end caps.
Compliance is manufactured from a high tech ‘Linear Low Density Polyethylene’ (LLDPE) with solid colour. It will not fade, rot, rust or crack and has built-in prismatic reflectors for enhanced night visibility.
L: 250 x W: 355 x H: 60mm
Slo-motion Compliance polyethylene speed hump
Introducing our ‘Slo-motion Compliance’ speed hump. Compliance is a modular speed control system consisting of independent modules each 250mm long with rounded end caps.
Compliance is manufactured from a high tech ‘Linear Low Density Polyethylene’ (LLDPE) with solid colour. It will not fade, rot, rust or crack and has built-in prismatic reflectors for enhanced night visibility.
L: 250 x W: 350 x H: 52mm
Economical rubber speed hump
This speed hump is an economical alternative to more expensive models. It is ideally suited to low traffic environments such as unit and town house developments or for short term installations.
They are manufactured from a mixture of natural and recycled rubber. When laid in an alternating pattern they conform to AS/NZS 2890.1:2004. Can also be used as a liquid bunding if installed with a sealant. e.g. silastic.
L: 500 x W: 350 x H: 45mm
Traffic calming rubber humps for standard duty applications
Traffic calming rubber humps are designed for use when traffic speed control is necessary for pedestrian safety, but a traditional speed hump is not suitable. Smoother approach and departure angles mean a wider range of vehicles can pass over them.
Solid rubber construction means these traffic calmers are capable of handling standard to heavy traffic.
L: 250 x W: 350 x H: 45mm
These end caps are compatible with SMTC350BY - Round Rubber Speed Hump Body 500mm - Black/Yellow
L: 250 x W: 350 x H: 45mm
These end caps are compatible with SMTC350BY - Round Rubber Speed Hump Body 500mm - Black/Yellow